Chicago Dryer Edge MAXX, Instruction Manual

Page: 199 / 288

Edge Maxx 3024-024e
C-3
I. OPERATION
CHI Panel Controls and Indicators
The CHI panel is the heart of the operation of
the Edge Maxx spreader/feeder.
Panel Display (A)
Shows current operating information (e.g.
speed and item count), fault messages, and, in
programming or adjustment mode, selectable
functions. Some of these messages are abbreviated
due to space constraints. Within this bulletin display
messages and CHI Panel markings are shown
and referred to as they actually appear. When
necessary, abbreviations will be explained.
STATION buttons (B)
Allows for automatic operation using preset or
user programmed values. The appropriate lamp
lights to show the currently selected station. Also,
turns feed/spread functions on or off.
When the panel display shows,
FEEDER OFF
the unit continues to run but will not accept
flatwork.
CHI SELECT button (C)
Turns the Gap Buster exit conveyor feature
on and off.
SPEED buttons (D)
Controls the speed of the unit in manual
mode. Pressing

decreases the speed and

increases the speed. The speed is shown in the
panel display.
BYPASS ON/OFF button (E)
Used to differentiate between flat sheets and
fitted sheets. When BYPASS is ON, the unit
automatically opens the lower spreader belts
to accommodate fitted sheets or odd items.
Increasing the spreader gap will reduce the pull
on multi-layer or thicker flatwork.
CURSOR button (F)
Moves the flashing underline to the desired
selection.
PROGRAMMING buttons (G)
Used in programming, adjusting or testing
the unit. These include the ADJUST, CD, TEST,
ENTER, +, and – buttons.
Each of these buttons will be explained in
context later in this section as well as in the
Programming
,
Adjustment
and
Testing
sections of this bulletin.
Figure C-1: The Edge Maxx CHI Panel.
A
G
F
B
C D E
TOC INDEX C-TOC