Chicago Dryer Edge MAXX, Instruction Manual

Page: 18 / 288

Introduction Edge MAXX
1-6
Safety Messages in this Manual
WARNING and CAUTION messages also
appear in this manual to highlight essential safety
information.
WARNING messages alert personnel that
personal injury may result from not following
recommended procedures.
WARNING
Never bypass any of the
safety devices. This could
result in serious injury.
BLACK BOX WARNING messages alert
personnel of the operating condition a unit
must be in before performing any procedure.
Personal injury may result
from not following
recommended procedures.
Perform only when the unit is OFF
with power disconnected.
CAUTION messages alert personnel that the
unit may be damaged if conditions, practices,
or procedures are not observed.
CAUTION
Never use compressed air
on or around electronic
components.
1.4 Equipment Description
A general overview of the Edge Maxx
spreader/feeder includes:
Machine Widths
Optional Equipment
Machine Widths
The Edge Maxx comes in a standard 120”
(3050 mm) width. Consult the factory for other
requirements or special requests.
Optional Equipment
The following optional equipment is available
on all models:
Easi-Glide:
A motorized track system that
makes it easy to change the position of the unit.
Interconnected Stop Circuit: Pressing a stop
button on the feeder, ironer or folder stops the
entire finishing line.
Variable Speed Interconnect:
The speeds of
each machine in a finishing line are automatically
coordinated for maximum efficiency.
Single Point Electrical Connection: Allows
the unit to receive its electrical supply from the
ironer.
Chicago Automatic Reject Processor:
Allows operator to press a stain or tear reject
button after a piece is fed into the unit for
automatic handling by the Chicago
®
folder at the
end of the finishing line.
Pacing Lights:
Allows operating standards
to be set and provides a visual signal to indicate
whether operators are reaching target production
rates.
ChiLinc:
Production data accumulation and
reporting system for archiving and analysis of
production and efficiency information.
•
•
TOC INDEX