CHI 13101, Use And Care Manual

Page: 8 / 36

8
Tips for Best Ironing Results (cont.)
3. Check the soleplate for mineral deposits or scorched
material before you begin ironing. Follow “Soleplate Care”
instructions on page 9.
FAST FACTS:
• Always iron with a lengthwise motion. Ironing in a circular motion
may stretch fabric.
• Natural fibers such as cotton and linen should be ironed slightly
damp for faster, easier ironing. If they are completely dry, use
maximum steam while ironing or mist them with water prior to
ironing.
• Any portion of a garment that has two layers of fabric such as
pockets, seams, collars, and cuffs should be ironed inside out first.
• To press a collar, iron from the points in using small strokes of the
iron. After wrinkles are removed, crease the collar into place by
hand. Treat French cuffs similarly, gently creasing by hand after
ironing.
IRONING VERSUS PRESSING:
• You may have heard the terms “ironing” and “pressing” used
interchangeably, but they are actually quite different. When ironing,
you slide the iron back and forth over fabric. When pressing, the
iron is placed and held on the fabric in one spot, lifted up, and this
process is repeated until the areas that need attention are smooth.
A “pressing” technique is helpful to avoid stretching fabrics.
• A pressing cloth can help reduce unwanted “shine” on fabrics.
You can purchase a pressing cloth in the laundry care section,
or a clean white dish towel or 100% cotton pillowcase works
equally well. You do not need to increase the recommended iron
temperature when using a pressing cloth.