Chevrolet Volt 2017 Page 54 Owner'S Manual Download | Manualshive

Page: 54 / 376

background image

Chevrolet VOLT Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9807421) - 2017 - CRC - 11/18/15

Seats and Restraints

53

3. Try to move the seat back and

forth to be sure it is locked in
place.

Seat Height Adjuster

Move the lever up or down to raise
or lower the seat.

Reclining Seatbacks

{

Warning

If either seatback is not locked, it
could move forward in a sudden
stop or crash. That could cause

(Continued)

Warning (Continued)

injury to the person sitting there.
Always push and pull on the
seatbacks to be sure they are
locked.

{

Warning

Sitting in a reclined position when
the vehicle is in motion can be
dangerous. Even when buckled
up, the safety belts cannot do
their job.

The shoulder belt will not be
against your body. Instead, it will
be in front of you. In a crash, you
could go into it, receiving neck or
other injuries.

The lap belt could go up over
your abdomen. The belt forces
would be there, not at your pelvic
bones. This could cause serious
internal injuries.

(Continued)

Warning (Continued)

For proper protection when the
vehicle is in motion, have the
seatback upright. Then sit well
back in the seat and wear the
safety belt properly.

To recline the seatback:

1. Lift the lever.

2. Move the seatback to the

desired position, and then
release the lever to lock the
seatback in place.

«
...
52
53
54
55
56
...
»

Summary of Contents for Volt 2017

























































































































































































































































































































































































Reviews:

No comments

Related manuals for Volt 2017

Brand: Pacbrake Pages: 9

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 2

Brand: Cadillac Pages: 494

Brand: Cadillac Pages: 500

Brand: Cadillac Pages: 40

Brand: Cadillac Pages: 432

Brand: Cadillac Pages: 338

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 438

Brand: Jabra Pages: 10

Brand: WABCO Pages: 48

Brand: TATA Motors Pages: 159

Brand: Thule Pages: 2

Brand: Prorack Pages: 20

Brand: Skoda Pages: 165

Impala Limited 2014

Brand: Chevrolet Pages: 356

Brand: Ford Pages: 458

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands