Chevrolet Volt 2017 Owner'S Manual Download | Manualshive

Page: 42 / 376

background image

Chevrolet VOLT Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9807421) - 2017 - CRC - 11/18/15

Keys, Doors, and Windows

41

Automatic door unlocking can be
programmed through the Driver
Information Center (DIC). See

Vehicle Personalization

Lockout Protection

If the vehicle is in ACC/
ACCESSORY or ON/RUN and the
power door lock switch is pressed
with the driver door open, all the
doors will lock and only the driver
door will unlock.

If the vehicle is off and locking is
requested while a door is open,
when all doors are closed the
vehicle will check for RKE
transmitters inside. If an RKE
transmitter is detected and the
number of RKE transmitters inside
has not reduced, the driver door will
unlock and the horn will chirp three
times.

Lockout Protection can be manually
overridden with the driver door open
by pressing and holding

Q

on the

power door lock switch.

Unlocked Door Anti-Lockout

If Unlocked Door Anti-Lockout is
turned on and the vehicle is off, the
driver door is open, and locking is
requested, all the doors will lock and
only the driver door will unlock. The
Unlocked Door Anti-Lockout feature
can be turned on or off using the
vehicle personalization menus. See

Vehicle Personalization

.

Safety Locks

The rear door safety locks prevent
passengers from opening the rear
doors from inside the vehicle.

Manual Safety Locks

The safety lock is on the inside
edge of the rear doors. To use the
safety lock:

1. Move the lever down to the

lock position.

2. Close the door.

3. Do the same for the other

rear door.

«
...
40
41
42
43
44
...
»

Summary of Contents for Volt 2017

























































































































































































































































































































































































Reviews:

No comments

Related manuals for Volt 2017

Brand: ZAPTEC Pages: 64

Brand: ZAPTEC Pages: 24

Brand: Laser Pages: 8

Brand: GATmatic Pages: 13

Brand: Ironton Pages: 7

Brand: Whispbar Pages: 85

Brand: Pyle Pages: 2

Brand: JKS Pages: 6

Brand: Xpresskit Pages: 18

Brand: Thule Pages: 3

Brand: true-i Pages: 11

Brand: Green Valley Pages: 17

Brand: Connects2 Pages: 2

MAGIC WATCH MWE-850-4XXL

Brand: Waeco Pages: 228

Brand: iSimple Pages: 12

Brand: Curt Manufacturing Pages: 4

MagicWatch MW150

Brand: Waeco Pages: 144

Brand: Brodit Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands