background image

Chevrolet VOLT Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9807421) - 2017 - CRC - 11/18/15

Vehicle Care

249

What to Use

The high voltage battery coolant
reservoir in the vehicle is filled with
GM Premix DEX-COOL

®

engine

coolant. See

Recommended Fluids

and Lubricants

0

334

. If using this

mixture, nothing else needs to be
added.

The coolant needs to be replaced at
the appropriate interval. See

Maintenance Schedule

0

326

.

Checking Coolant

The vehicle must be on a level
surface when checking the coolant
level.

The high voltage battery coolant
reservoir is located in the engine
compartment. See

Engine

Compartment Overview

0

242

.

1. High Voltage Battery

Coolant Reservoir

2. Power Electronics Coolant

Reservoir

Check to see if coolant is visible in
the high voltage battery coolant
reservoir (1). If coolant is visible but
the coolant level is below the cold
fill line on the side of the reservoir,
there could be a leak in the cooling
system.

The high voltage battery cooling
system supports the operation of
sensitive electronics that are critical
to vehicle operation.

The high voltage battery cooling
system should only be serviced by a
qualified technician.

Cooling System (Power
Electronics and Charger
Modules)

The power electronics and charger
modules are cooled using the same
coolant loop.

The power electronics and charger
modules in the vehicle are kept
below a maximum temperature
threshold. If the coolant temperature
rises above this temperature
threshold, the electric cooling fans
will turn on and cool the coolant
until the correct temperature is
reached.

What to Use

The power electronics and charger
modules coolant reservoir in the
vehicle is filled with GM Premix
DEX-COOL engine coolant. See

Recommended Fluids and
Lubricants

0

334

If using this

mixture, nothing else needs to be
added.

Summary of Contents for Volt 2017

























































































































































































































































































































































































Reviews: