Chevrolet Volt 2017 Page 209 Owner'S Manual Download | Manualshive

Page: 209 / 376

background image

Chevrolet VOLT Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9807421) - 2017 - CRC - 11/18/15

208

Driving and Operating

To cancel APA, press

O

again.

Assistance Systems for
Driving

If equipped, when driving the
vehicle in a forward gear, Forward
Collision Alert (FCA), Lane
Departure Warning (LDW), Lane
Keep Assist (LKA), Side Blind Zone
Alert (SBZA), Lane Change Alert
(LCA), and/or the Forward
Automatic Braking (FAB) can help to
avoid a crash or reduce crash
damage.

Forward Collision Alert
(FCA) System

If equipped, the FCA system may
help to avoid or reduce the harm
caused by front-end crashes. When
approaching a vehicle ahead too
quickly, FCA provides a red flashing
alert on the windshield and rapidly
beeps. FCA also lights an amber
visual alert if following another
vehicle much too closely.

FCA detects vehicles within a
distance of approximately 60 m
(197 ft) and operates at speeds
above 8 km/h (5 mph).

{

Warning

FCA is a warning system and
does not apply the brakes. When
approaching a slower-moving or
stopped vehicle ahead too rapidly,
or when following a vehicle too
closely, FCA may not provide a
warning with enough time to help
avoid a crash. It also may not
provide any warning at all. FCA
does not warn of pedestrians,
animals, signs, guardrails,
bridges, construction barrels,
or other objects. Be ready to take
action and apply the brakes. See

Defensive Driving

FCA can be disabled with the FCA
steering wheel control.

Detecting the Vehicle Ahead

FCA warnings will not occur unless
the FCA system detects a vehicle
ahead. When a vehicle is detected,
the vehicle ahead indicator will
display green. Vehicles may not be
detected on curves, highway exit
ramps, or hills, due to poor visibility;
or if a vehicle ahead is partially
blocked by pedestrians or other
objects. FCA will not detect another
vehicle ahead until it is completely
in the driving lane.

{

Warning

FCA does not provide a warning
to help avoid a crash, unless it
detects a vehicle. FCA may not
detect a vehicle ahead if the FCA
sensor is blocked by dirt, snow,

(Continued)

«
...
207
208
209
210
211
...
»

Summary of Contents for Volt 2017

























































































































































































































































































































































































Reviews:

No comments

Related manuals for Volt 2017

Brand: AAMP of America Pages: 6

Brand: TATA Motors Pages: 94

Brand: GÄN Pages: 24

Wallbox eM4 Single

Brand: ABL Pages: 68

FleetMaster Air FW8 Series

Brand: SAF-HOLLAND Pages: 20

Transit Vancouver Wagon

Brand: Webasto Pages: 44

Vantage 12 Series

Brand: Ecco Pages: 5

Brand: Waeco Pages: 172

Brand: VBG Pages: 16

Brand: BMW Pages: 55

Brand: Whispbar Pages: 15

Brand: Yakima Pages: 12

Brand: Axxess Pages: 16

ULTIMATE SPEED 296713

Brand: walser Pages: 10

Brand: Mercedes-Benz Pages: 373

Brand: Mont Blanc Pages: 2

Brand: Acura Pages: 347

Brand: Lincoln Pages: 538

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands