Chevrolet Volt 2017 Page 142 Owner'S Manual Download

Page: 142 / 376

Chevrolet VOLT Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9807421) - 2017 - CRC - 11/18/15

Instruments and Controls

141

Vehicle
Personalization

Use the audio system controls to
access the personalization menus
for customizing vehicle features.

The following are all possible
personalization features. Depending
on the vehicle, some may not be
available.

Manual Radio Controls

MENU :

Press the center of the

knob to enter menus and select
menu items. Turn the knob to scroll
through the menus.

BACK :

Press to return to the

previous menu or exit.

Touchscreen Controls

1. Touch the desired feature to

display a list of available
options.

2. Touch to select the desired

feature setting.

3. Press

BACK on the

faceplate or touch

to return

to the previous menu or exit.

Personalization Menus

The following list of menu items may
be available:

Time and Date

Language (Language)

Teen Driver

Valet Mode

Radio

Vehicle

Bluetooth

Apple CarPlay

Android Auto

USB Auto Launch

Voice

Display

Rear Camera

Return to Factory Settings

Software Information

Each menu is detailed in the
following information.

Time and Date

Manually set the time and date. See

Clock

Language (Language)

Select Language, then select from
the available language(s).

Teen Driver

Select and the following may
display:

View Report Card

Manage Settings

Change PIN

Key Registration

Clear All Teen Keys/PIN

View Report Card

This allows the driver

’

s driving

habits to be viewed. See

“

Teen

Driver

”

“

Settings

”

in the

Infotainment Manual.

Summary of Contents for Volt 2017

























































































































































































































































































































































































Search results

Summary of Contents for Volt 2017

Reviews:

Related manuals for Volt 2017

Brands by name

Popular brands

Chevrolet Volt 2017, Owner'S Manual

Search results

Summary of Contents for Volt 2017

Reviews:

Related manuals for Volt 2017

Brands by name

Popular brands