Chevrolet Volt 2017 Owner'S Manual Download

Page: 117 / 376

Chevrolet VOLT Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9807421) - 2017 - CRC - 11/18/15

116

Instruments and Controls

Low Fuel Warning Light

The low fuel warning light comes on
briefly when the vehicle is started.

This light also comes on when the
fuel level is low. When fuel is added,
the light should go off. If it does not,
have the vehicle serviced.

Security Light

The security light should come on
briefly as the engine is started. If it
does not come on, have the vehicle

serviced by your dealer. If the
system is working normally, the
indicator light turns off.

If the light stays on and the engine
does not start, there could be a
problem with the theft-deterrent
system. See

Immobilizer

Operation

Vehicle Ready Light

The vehicle ready light comes on
whenever the vehicle is ready to be
driven.

High-Beam On Light

This light comes on when the
high-beam headlamps are in use.

See

Headlamp High/Low-Beam

Changer

151

IntelliBeam

Light

This light comes on when the
IntelliBeam system, if equipped, is
enabled.

See

Exterior Lamp Controls

149

Summary of Contents for Volt 2017

























































































































































































































































































































































































Search results

Summary of Contents for Volt 2017

Reviews:

Related manuals for Volt 2017

Brands by name

Popular brands

Chevrolet Volt 2017, Owner'S Manual

Search results

Summary of Contents for Volt 2017

Reviews:

Related manuals for Volt 2017

Brands by name

Popular brands