Chevrolet Volt 2017 Owner'S Manual Download Page 106

Page: 106 / 376

Chevrolet VOLT Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9807421) - 2017 - CRC - 11/18/15

Instruments and Controls

105

Speedometer

The speedometer shows the
vehicle's speed in either kilometers
per hour (km/h) or miles per
hour (mph).

Odometer

The odometer shows how far the
vehicle has been driven, in either
kilometers or miles.

Trip Odometer

The trip odometer shows how far
the vehicle has been driven since
the trip odometer was last reset.

The trip odometer is accessed and
reset through the Driver Information
Center (DIC). See

Driver

Information Center (DIC)

130

Battery Gauge (High
Voltage)

This gauge shows the high voltage
battery charge level.

The arrow next to the battery
symbol points to the side of the
vehicle the charge port is on.

See

Electric Mode

180

Fuel Gauge

When the ignition is on, the fuel
gauge indicates about how much
fuel is left in the tank.

There is an arrow near the fuel
gauge pointing to the side of the
vehicle the fuel door is on.

When the indicator nears empty, the
low fuel light comes on. There still is
a little fuel left, but the vehicle
should be refueled soon.

Summary of Contents for Volt 2017

























































































































































































































































































































































































Search results

Summary of Contents for Volt 2017

Reviews:

Brands by name

Popular brands

Chevrolet Volt 2017, Owner'S Manual

Search results

Summary of Contents for Volt 2017

Reviews:

Brands by name

Popular brands