manualshive.com logo in svg

Chevrolet VOLT 2014, Owner'S Manual

The Chevrolet VOLT 2014 Owner's Manual is a comprehensive guide essential for every VOLT owner. Packed with detailed instructions and helpful tips, this manual ensures you get the most out of your vehicle. Download your free copy today from our website, the ultimate destination for user manuals downloads.

Share
Download
background image

(16,1)

Chevrolet VOLT Owner Manual (GMNA-Localizing-U.S./Canada-6014139) -

2014 - CRC - 9/16/13

9-16

Driving and Operating

Warning (Continued)

.

Never stack heavier
things, like suitcases,
inside the vehicle so that
some of them are above
the tops of the seats.

.

Do not leave an
unsecured child restraint
in the vehicle.

.

Secure loose items in the
vehicle.

.

Do not leave a seat folded
down unless needed.

Starting and
Operating

New Vehicle Break-In

The vehicle does not require a
break-in period. Vehicle break-in is
performed during manufacturing.

Power Button

The vehicle has an electronic
pushbutton start. The POWER

O

button light flashes when the driver
door is open and the vehicle is not

on. The flashing light will eventually
time out. The POWER

O

button light

is on steady when in ON/RUN
power mode. When the vehicle is
turned off, the POWER

O

button

light will turn off.

The Remote Keyless Entry (RKE)
transmitter must be in the vehicle for
the system to operate. If the vehicle
will not start, place the RKE
transmitter in the transmitter slot.
See

Remote Keyless Entry (RKE)

System Operation on page 2-2

.

ON/RUN:

This position is for

starting and driving. With the vehicle
off, and the brake pedal applied,
pressing the POWER

O

button once

will place the vehicle in ON/RUN.
When the READY light is on in the
instrument cluster, the vehicle is
ready to be driven. This could take
up to 15 seconds at extremely cold
temperatures. See

Vehicle Ready

Light on page 5-27

. The engine will

only start if needed. If the vehicle
did not start, the instrument cluster
will display a screen with inactive

Summary of Contents for VOLT 2014











































































































































































































































































































































































































Reviews:

No comments

Related manuals for VOLT 2014

TATA Motors Nano Owner'S Manual & Service Book preview
Nano
Brand: TATA Motors Pages: 94
GÄN GA Manual preview
GA
Brand: GÄN Pages: 24
BrandMotion 1009-6503 Installation Instructions Manual preview
1009-6503
Brand: BrandMotion Pages: 8
BGS technic 40108 Manual preview
40108
Brand: BGS technic Pages: 5
Oldsmobile 1999 88 Owner'S Manual preview
1999 88
Brand: Oldsmobile Pages: 344
ABL eMH3 Installation Manual preview
eMH3
Brand: ABL Pages: 66
Yescom YES5062 User Manual preview
YES5062
Brand: Yescom Pages: 4
Z Automotive Tazer DT User Manual preview
Tazer DT
Brand: Z Automotive Pages: 16
Jeep Cherokee 2000 Service Manual preview
Cherokee 2000
Brand: Jeep Pages: 1528
Veigel S47290920 Installation And Operating Instructions Manual preview
S47290920
Brand: Veigel Pages: 24
Cellular Line interphone Instruction Manual preview
interphone
Brand: Cellular Line Pages: 25
ACV 281178-28G-M Installation Manual preview
281178-28G-M
Brand: ACV Pages: 2
Car-Systems Parktronic system Volkswagen Golf MK7 Assembly Manual preview
Parktronic system Volkswagen Golf MK7
Brand: Car-Systems Pages: 10
Yakima K974 Manual preview
K974
Brand: Yakima Pages: 11
Toyota 2011 Camry SE V6 Brochure & Specs preview
2011 Camry SE V6
Brand: Toyota Pages: 33
Menabo YELO 4 NS Fitting Instructions Manual preview
YELO 4 NS
Brand: Menabo Pages: 8
Bracketron Multi Vehicle Mount MVM-35-05 Installation Manual preview
Multi Vehicle Mount MVM-35-05
Brand: Bracketron Pages: 4
Westin 32-1660 Instructions preview
32-1660
Brand: Westin Pages: 3

Brands by name

Popular brands

Load more brands