manualshive.com logo in svg

Chevrolet TRAX 2017, Owner'S Manual

The Chevrolet TRAX 2017 Owner's Manual is a comprehensive guide that provides valuable information and instructions for operating your vehicle. Easily download this essential manual for free from our website, ensuring you have all the necessary information at your fingertips to get the most out of your TRAX 2017.

Share
Download
background image

Chevrolet TRAX Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

10122735) - 2017 - crc - 7/12/16

Instruments and Controls

137

Vehicle
Personalization

Personalization Menu (Radio
without Touchscreen)

The audio system controls are used
to access the personalization
menus for customizing vehicle
features.

The following are all possible
personalization features. Depending
on the vehicle, some may not be
available.

MENU :

Turn to scroll through the

menus or setup items. Press to
enter the menus and select the
menu items.

BACK :

Press to exit or return to

the previous screen or menu.

To access a menu:

1. Press MENU.

2. Turn MENU to the

desired menu.

3. Press MENU to select.

Menus and functions may vary
depending on vehicle options.

Entering the Personalization
Menus

Select Settings from the
Home Page.

The following menus may be
available:

.

Time and Date

.

Tone Settings

.

Auto Volume Control

.

Maximum Startup Volume

.

Vehicle Settings

Time and Date

Select Time and Date to adjust the
clock. See

Clock

0

107

.

Tone Settings

Select to set the radio tone. See

“

Tone Settings

”

under

“

Radio

Controls without Touchscreen

”

in

Operation

0

157

.

Auto Volume Control

This feature automatically adjusts
the radio volume based on the
speed of the vehicle.

Select the desired value.

Maximum Startup Volume

When the vehicle is started and the
radio volume is greater than this set
level, the volume is adjusted to this
level.

Select the desired value.

Vehicle Settings

Select and the following may
display:

.

Comfort and Convenience

.

Collision/Detection Systems

.

Languages

.

Lighting

.

Power Door Locks

.

Remote Lock, Unlock, Start

.

Return to Factory Settings

.

Software Information

Comfort and Convenience

Select and the following may
display:

.

Chime Volume

.

Auto Wipe in Reverse Gear

Summary of Contents for TRAX 2017






















































































































































































































































































































































































Reviews:

No comments

Related manuals for TRAX 2017

iDataLink maestro Pr 2 Install Manual preview
maestro Pr 2
Brand: iDataLink Pages: 99
VDO DLD Wide Range II Installation Instructions Manual preview
DLD Wide Range II
Brand: VDO Pages: 84
Wagan TravelCharge Companion GO-Plus User Manual preview
TravelCharge Companion GO-Plus
Brand: Wagan Pages: 3
Whispbar K604W Fitting Instructions Manual preview
K604W
Brand: Whispbar Pages: 15
Rati Armster 2 User Manual preview
Armster 2
Brand: Rati Pages: 2
GMC 2013 GMC Savana Owner'S Manual preview
2013 GMC Savana
Brand: GMC Pages: 398
Weltmann KFZ-Teile 9B500016 Fitting Instructions Manual preview
9B500016
Brand: Weltmann KFZ-Teile Pages: 12
Ford Fusion 2019 Supplement Manual preview
Fusion 2019
Brand: Ford Pages: 51
Fleetwood Bounder turbo diesel 2001 Instructions Manual preview
Bounder turbo diesel 2001
Brand: Fleetwood Pages: 166
Honda 2001 Accord Sedan Owner'S Manual preview
2001 Accord Sedan
Brand: Honda Pages: 372
Imiola HAK-POL F/005 Fitting Instruction preview
F/005
Brand: Imiola HAK-POL Pages: 3
Ultraplast MD19 User Manual preview
MD19
Brand: Ultraplast Pages: 5
Laser PW-BT50AR Quick Start Manual preview
PW-BT50AR
Brand: Laser Pages: 3
Blue Bird TC/2000 Owner'S Manual preview
TC/2000
Brand: Blue Bird Pages: 111
OEM Audio Reference 450Q Manual preview
Reference 450Q
Brand: OEM Audio Pages: 21
Honda 2011 odyssey EX-L Manual preview
2011 odyssey EX-L
Brand: Honda Pages: 722
Improved Racing EFR-605 Instructions Manual preview
EFR-605
Brand: Improved Racing Pages: 11
Porsche Turbo 2007 Driver Manual preview
Turbo 2007
Brand: Porsche Pages: 347

Brands by name

Popular brands

Load more brands