Chevrolet Trax 2016, Owner'S Manual

Page: 164 / 358

Chevrolet TRAX Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
9159371) - 2016 - crc - 5/21/15
Infotainment System 163
.
Up to five cell phones can be
paired to the Bluetooth system.
.
The pairing process is disabled
when the vehicle is moving.
.
Pairing only needs to be
completed once, unless the
pairing information on the cell
phone changes or the cell phone
is deleted from the system.
.
Only one paired cell phone can
be connected to the Bluetooth
system at a time.
.
If multiple paired cell phones are
within range of the system, the
system connects to the first
available paired cell phone in the
order that they were first paired
to the system. To link to a
different paired phone, see
“ Connecting to a Different
Phone ” later in this section.
Pairing a Phone
1. Press
b
/
g
. The system
responds “ Ready, ” followed by
a tone.
2. Say “ Bluetooth. ” This command
can be skipped.
3. Say “ Pair. ” The system
responds with instructions and
a four-digit Personal
Identification Number (PIN).
The PIN is used in Step 5.
4. Start the pairing process on the
cell phone that you want to
pair. For help with this process,
see your cell phone
manufacturer's user guide.
5. Locate the device named “ Your
Vehicle ” in the list on the cell
phone. Follow the instructions
on the cell phone to enter the
PIN provided in Step 3. After
the PIN is successfully entered,
the system prompts you to
provide a name for the paired
cell phone. This name will be
used to indicate which phones
are paired and connected to
the vehicle. The system
responds with
“ <Phone name>
has been successfully paired ”
after the pairing process is
complete.
6. Repeat Steps 1 − 5 to pair
additional phones.
Listing All Paired and Connected
Phones
The system can list all cell phones
paired to it. If a paired cell phone is
also connected to the vehicle, the
system responds with
“ is connected ”
after that phone name.
1. Press
b
/
g
. The system
responds “ Ready, ” followed by
a tone.
2. Say “ Bluetooth. ”
3. Say “ List. ”
Deleting a Paired Phone
If the phone name you want to
delete is unknown, see
“ Listing All
Paired and Connected Phones ”
previously in this section.
1. Press
b
/
g
. The system
responds “ Ready, ” followed by
a tone.
2. Say “ Bluetooth. ”
3. Say “ Delete. ” The system asks
for which phone to delete.
4. Say the name of the phone you
want to delete.