Chevrolet TRAX Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
9159371) - 2016 - crc - 5/21/15
Instruments and Controls
111
Language
This menu is not available while the
vehicle is moving. Press SET/CLR
while the language display is active
and move
w x
to change the
language of the displays when
LANG SET is displayed. Select 1 or
2 for the language display. 1 is
Alphabet and 2 is Arabic Numeral.
Press SET/CLR to confirm the
setting.
Compass
See
Compass
0
93
for information
on setting the compass.
Tire Learn
This display allows for matching of
the TPMS sensors. See
Tire
Pressure Monitor System
0
275
and
Tire Pressure Monitor Operation
0
276
.
Vehicle Messages
DIC messages display when the
status of the vehicle has changed
and action may be needed to
correct the condition. Multiple
messages appear one after another.
Press any of the DIC buttons on the
turn signal lever to acknowledge
and clear them from the display.
More urgent messages cannot be
cleared from the DIC display. All
messages should be taken
seriously. Clearing messages will
not correct the problem.
Vehicle messages appear as code
numbers.
25 :
Left Front Turn Indicator Failure
26 :
Left Rear Turn Indicator Failure
27 :
Right Front Turn Indicator
Failure
28 :
Right Rear Turn Indicator
Failure
73 :
Service All Wheel Drive System
84 :
Engine Power Is Reduced
89 :
Service Vehicle Soon
125 :
Compass Calibrating
—
Drive
in Circles
173 :
All Wheel Drive Off
Engine Oil Messages
:
% CHANGE
This message displays when the
engine oil needs to be changed.
When changing the engine oil, be
sure to reset the Oil Life System.
See
Engine Oil Life System
0
240
,
Engine Oil
0
238
, and
Maintenance
Schedule
0
308
.
Tire Messages
LF XX, RF XX, LR XX,
or RR XX
A message displays when the tire
pressure is low. It shows the
location of the low tire and the
approximate pressure of the low tire.
If a tire pressure message appears,
stop as soon as you can. Inflate the
tires by adding air until the tire
pressure is equal to the values
shown on the Tire and Loading