Chevrolet T-Series, Owner'S Manual

Page: 90 / 326

6
: Turn this band on the windshield wiper lever to
set the delay time between wipes. The closer
to the top of the lever, the shorter the delay.
R
(LO): Turn the knob to this setting to operate
the windshield wipers at a low speed.
RR
(HI): Turn the knob to this setting to operate
the windshield wipers at a high speed.
Be sure to clear ice and snow from the wiper blades
before using them. If they are frozen to the
windshield, carefully loosen or thaw them. If your
blades do become worn or damaged, get new
blades or blade inserts. For more information, see
Windshield Wiper Blade Replacement on page 229 .
Heavy snow or ice can overload your wipers. The
windshield wiper motor is protected from
overload by a circuit breaker and a fuse. If the
motor overheats due to heavy snow or ice,
the wiper will stop until the motor cools. Although
the circuit is protected from electrical overload,
overload due to heavy snow or ice may cause
wiper linkage damage. Always clear ice and heavy
snow from the windshield before using your
windshield wipers.
Windshield Washer
To wash the window,
you must have the
windshield wipers on.
L
(Washer Fluid): Press this button at the end
of the multifunction lever located on the right
side of the steering column. Spray will continue as
long as this button is pressed.
{
CAUTION:
In freezing weather, do not use your
washer until the windshield is warmed.
Otherwise the washer fluid can form ice
on the windshield, blocking your vision.
90