Chevrolet T-Series, Owner'S Manual

Page: 237 / 326

Tightening the Wheel Nuts
{
CAUTION:
Wheel nuts that are not tight can work
loose. If all the nuts on a wheel come off,
the wheel can come off the vehicle,
causing a crash. All wheel nuts must be
properly tightened. Follow the rules in this
section to be sure they are.
This section lets you know how often to check the
tightness of the wheel nuts on your vehicle and
how tight they must be.
First, use these pictures to decide what kind of
wheels you have.
Then, refer to the following steps for the wheels
you have.
Hub-Piloted Wheels, 8-Hole or 10-Hole
The studs and nuts used with these wheels have
right-hand threads.
1. With intermittent pilot pads, position a pad at
12 o’clock to center the wheel and reduce
run-out.
2. Put the tire and rim assembly on the axle hub.
Install the outer rear tire and rim assembly so
that its valve stem is exactly opposite the
valve stem on the inner tire and rim assembly.
Hub-Piloted Type,
8-Hole
Hub-Piloted Type,
10-Hole
237