Chevrolet Spark Owner Manual (GMK-Localizing-Israel-15672694) - 2022 -
CRC - 3/17/21
Driving and Operating
133
How the System Works
The LDW camera sensor is on the windshield
ahead of the rearview mirror.
To turn LDW on and off, press
@
on the
instrument panel to the left of the steering
wheel. The control indicator will light when
LDW is on.
When LDW is on,
@
is green if LDW is
available to warn of a lane departure. If the
vehicle crosses a detected lane marking
without using the turn signal in that
direction,
@
changes to amber and flashes.
Additionally, there will be three beeps on
the right or left, depending on the lane
departure direction.
When the System Does Not Seem To
Work Properly
The system may not detect lanes as well
when there are:
.
Close vehicles ahead.
.
Sudden lighting changes, such as when
driving through tunnels.
.
Banked roads.
If the LDW system is not functioning
properly when lane markings are clearly
visible, cleaning the windshield may help.
LDW alerts may occur due to tar marks,
shadows, cracks in the road, temporary or
construction lane markings, or other road
imperfections. This is normal system
operation; the vehicle does not need service.
Turn LDW off if these conditions continue.
Fuel
Fuel (for Petrol Engines)
Only use unleaded fuel that complies with
European standard EN 228 or E DIN 51626-1
or equivalent.
Your engine is capable of running with E10
fuel that fulfills these standards. E10 fuel
contains up to 10% bioethanol.
Use fuel with the recommended octane
rating Engine Data. Use of fuel with too low
an octane rating can reduce engine power
and torque and slightly increases fuel
consumption.
.
Caution
Do not use fuel or fuel additives that
contain metallic compounds such as
manganese-based additives. This may
cause engine damage.
Caution
Use of fuel that does not comply to EN
228 or E DIN 51626-1 or equivalent can
lead to deposits or engine damage and
loss of warranty.
Caution
Use of fuel with too low an octane rating
could lead to uncontrolled combustion
and engine damage.