Chevrolet Orlando 2013 Owner'S Manual Download Page 5

Page: 5 / 372

Black plate (5,1)

Chevrolet Orlando Owner Manual - 2013 - CRC - 6/5/12

Introduction

Vehicle Symbol Chart

Here are some additional symbols
that may be found on the vehicle
and what they mean. For more
information on the symbol, refer to
the Index.

Airbag Readiness Light

Air Conditioning

Antilock Brake System (ABS)

Audio Steering Wheel Controls

or OnStar

Brake System Warning Light

Charging System

Cruise Control

Engine Coolant Temperature

Exterior Lamps

Fog Lamps

Fuel Gauge

Fuses

Headlamp High/Low-Beam

Changer

LATCH System Child

Restraints

Malfunction Indicator Lamp

Oil Pressure

}

Power

Remote Vehicle Start

Safety Belt Reminders

Tire Pressure Monitor

Traction Control/StabiliTrak

Windshield Washer Fluid

Summary of Contents for Orlando 2013





















































































































































































































































































































































































Search results

Summary of Contents for Orlando 2013

Reviews:

Chevrolet Orlando 2013, Owner'S Manual, Page: 5 / 372

Search results

Summary of Contents for Orlando 2013

Reviews: