manualshive.com logo in svg

Chevrolet Orlando 2013, Owner'S Manual, Page: 154 / 372

Share
Download
Chevrolet Orlando 2013 Owner'S Manual Download Page 154

Black plate (12,1)

Chevrolet Orlando Owner Manual - 2013 - CRC - 6/5/12

7-12

Infotainment System

No Title Info:

The system is

working properly. No song title
information is available at this time
on this channel.

No CAT Info:

The system is

working properly. No category
information is available at this time
on this channel.

No Information:

The system is

working properly. No text or
informational messages are
available at this time on this
channel.

No Subscription Please Renew:

SiriusXM subscription needs to be
reactivated. Contact SiriusXM at
www.siriusxm.com or call
1-866-635-2349 (U.S.) and
www.xmradio.ca or call
1-877-209-0079 (Canada).

No XM Signal:

The system is

working properly. The vehicle may
be in a location where the SiriusXM
signal is being blocked. When the
vehicle is moved into an open area,
the signal should return.

CAT Not Found:

The system is

working properly. There are no
channels available for the selected
category.

XM Radio ID:

If tuned to channel 0,

this message alternates with the
SiriusXM Radio eight-digit radio ID
label. This label is needed to
activate the service.

Unknown:

If this message is

received when tuned to channel 0,
there could be a receiver fault.
Consult with your dealer.

Check Antenna:

If this message

does not clear within a short period
of time, the receiver could have a
fault. Consult with your dealer.

XM Not Available:

If this message

does not clear within a short period
of time, the receiver could have a
fault. Consult with your dealer.

Radio Reception

The theft-deterrent feature works by
learning a portion of the Vehicle
Identification Number (VIN) to the

infotainment system. The
infotainment system does not
operate if it is stolen or moved to a
different vehicle.

Satellite Radio Antenna

The SiriusXM Satellite Radio
antenna is located on the roof of the
vehicle. Keep the antenna clear of
obstructions for clear radio
reception.

If the vehicle has a sunroof, the
performance of the XM system may
be affected if the sunroof is open.

Multi-Band Antenna

The multi-band antenna is on the
roof of the vehicle. The antenna is
used for the AM-FM radio, OnStar,
the SiriusXM Satellite Radio Service
System, and GPS (Global
Positioning System), if the vehicle
has these features. Keep the
antenna clear of obstructions for
clear reception.

Summary of Contents for Orlando 2013





















































































































































































































































































































































































Reviews:

No comments