Chevrolet MyLink2018, Manual, Page: 92 / 125

Chevrolet MyLink Infotainment System (GMNA-Localizing-U.S./Canada-
10999158) - 2018 - crc - 8/16/17
Voice Recognition 91
“ Destination Place of Interest ” :
Begin a dialog to enter a destination
Place of Interest category or major
brand name (if equipped).
Not all brand names of businesses
are available for voice entry. Most
major chains, such as chains with
more than 20 locations, should be
available to search for by name, but
the name must be precisely spoken.
Nicknames or short names for the
businesses will not likely be found.
Lesser known businesses might
have to be located by category,
such as fast food, hotels, or banks.
“ Destination Contact ” : Begin a
dialog to enter a specific destination
contact name.
“ Cancel Route ” : End route
guidance.
Voice Recognition for the
Phone
“ Call <contact name> ” : Initiate a
call to an entered contact. The
command may include location if
the contact has location numbers
stored.
“ Call <contact name> At Home, ”
“ At Work, ” “ On Mobile, ” or “ On
Other ” : Initiate a call to an entered
contact and location at home, at
work, on mobile device, or on
another phone.
“ Call <phone number> ” : Initiate a
call to a standard phone number or
emergency number.
If the call is being initiated outside of
North America, state
“ Call <phone
number>, ” then after the system
reads back the number, repeat the
“ Call ” command to initiate the call.
If the number is not correct, “ Delete ”
will delete the number and allow it to
be entered again. If the number is
not complete, speak the remaining
digits.
“ Pair Phone ” : Begin the Bluetooth
pairing process. Follow instructions
on the radio display.
“ Switch Phone ” : Select a different
phone for outgoing calls.
“ Voice Keypad ” : Begins a dialog
to enter special numbers like
international numbers. The numbers
can be entered in groups of digits
with each group of digits being
repeated back by the system. If the
group of digits is not correct, the
command
“ Delete ” will remove the
last group of digits and allow them
to be re-entered. Once the entire
number has been entered, the
command
“ Call ” will start dialing the
number.
“ Voice Mail ” : Initiate a call to voice
mail numbers.
Voice Pass-Thru
Voice pass-thru allows access to the
voice recognition commands on the
cell phone, for example, Siri or
Voice Command. See the cell
phone manufacturer's user guide to
see if the cell phone supports this
feature. To activate the phone voice
recognition system, press and hold
g
on the steering wheel for a few
seconds.