Chevrolet Express 2012 Owner'S Manual Download Page 71 | Manualshive

Page: 71 / 404

Chevrolet Express 2012 Owner'S Manual Download Page 71

Black plate (25,1)

Chevrolet Express Owner Manual - 2012 - crc - 11/11/11

Seats and Restraints

3-25

Additional windshield breakage may
also occur from the right front
passenger airbag.

.

Airbags are designed to inflate
only once. After an airbag
inflates, you will need some new
parts for the airbag system.
If you do not get them, the airbag
system will not be there to help
protect you in another crash.
A new system will include airbag
modules and possibly other
parts. The service manual for
the vehicle covers the need to
replace other parts.

.

The vehicle has a crash sensing
and diagnostic module which
records information after a
crash. See

Recording and Privacy on
page 13

and

Recorders on page 13

.

Let only qualified technicians
work on the airbag systems.
Improper service can mean that

an airbag system will not work
properly. See your dealer for
service.

Airbag On-Off Switch

If the instrument panel has one of
the switches pictured in the
following illustrations, the vehicle
has an airbag on-off switch that you
can use to manually turn on or off
the right front passenger airbag.

United States

Canada and Mexico

If the vehicle does not have an
airbag on-off switch, it may have a
passenger sensing system. See

Passenger Sensing System on
page 3

.

«
...
69
70
71
72
73
...
»

Summary of Contents for Express 2012





















































































































































































































































































































































































































Reviews:

No comments