
Taillamps, Turn Signal, Stoplamps
and Back-up Lamps
To replace one of these bulbs, do the following:
1. Open the tailgate. See Tailgate on page 2-20 for
more information.
2. Remove the two rear
lamp assembly screws
near the tailgate
latch and pull out the
lamp assembly.
3. Locate the bulb you wish to change.
A. Stoplamp/Taillamp
B. Turn Signal Lamp
C. Back-up Lamp
4. Press the release tab
and turn the bulb
socket
counterclockwise to
remove it from
the taillamp assembly.
5. Pull the old bulb straight out from the socket.
5-57
Summary of Contents for Chevrolet Avalanche
