Black plate (9,1)
Chevrolet Camaro Owner Manual (GMNA-Localizing-Europe-8087691) -
2015 - CRC - 7/8/14
Vehicle Care
10-9
3. Pull the engine cover forward to
disengage it from the two
rear tabs.
4. Reverse Steps 1
–
3 to reinstall
the engine cover.
6.2L V8 Engine Cover (L99
Engine Shown, LS3 Similar)
1. Engine Oil Fill Cap
2. Engine Cover
To remove:
1. Remove the engine oil
filler cap (1).
2. Lift the engine cover (2) to
disengage the two front
attachment points.
3. Pull the engine cover forward to
disengage it from the horizontal
rear attachments.
4. Reverse Steps 1
–
3 to reinstall
the engine cover.
Engine Oil
To ensure proper engine
performance and long life, careful
attention must be paid to engine oil.
Following these simple, but
important steps will help protect
your investment:
.
Always use engine oil approved
to the proper specification and of
the proper viscosity grade. See
“
Selecting the Right Engine Oil
”
in this section.
.
Check the engine oil level
regularly and maintain the
proper oil level. See
“
Checking
Engine Oil
”
and
“
When to Add
Engine Oil
”
in this section.
.
Change the engine oil at the
appropriate time. See
.
.
Always dispose of engine oil
properly. See
“
What to Do with
Used Oil
”
in this section.
Checking Engine Oil
It is a good idea to check the engine
oil level at each fuel fill. In order to
get an accurate reading, the vehicle
must be on level ground. The
engine oil dipstick handle is a loop.
See
for the location of the
engine oil dipstick.
Obtaining an accurate oil level
reading is essential:
1. If the engine has been running
recently, turn off the engine and
allow several minutes for the oil
to drain back into the oil sump.
Checking the oil level too soon
after engine shutoff will not
provide an accurate oil level
reading.
