Chevrolet 6500XD 2022 Owner'S Manual Download

Page: 191 / 312

Chevrolet Low Cab Forward 6.7L Diesel Engine 6500XD (GMNA-Localizing-

U.S.-15749874) - 2022 - CRC - 12/2/21

190

Vehicle Care

Cab Tilting

Before Tilting the Cab

{

Warning

To help avoid personal injury and
property damage:

Park the vehicle on level ground and
check that there is enough space in
front of and above the cab.

Set the parking brake firmly and block
the front wheels.

Move the selector lever in the "P"
position (models with P-range) or

“

”

position (models without P-range).

Secure loose articles in the cab.

Stop the engine.

Close the cab door.

Keep the area surrounding the cab
clear.

You and others could be seriously injured.

Cab Tilt Levers and Grip

1. Cab Unlock Marker
2. Handle
3. Upper Lever
4. Lower Lever
5. Grip

Tilting the Cab

1. Apply the parking brake and make sure

the transmission is in the

“

”

position

(models with P-range) or

“

”

position

(models without P-range). Close the
doors completely.

Summary of Contents for 6500XD 2022

























































































































































































































































































































Search results

Summary of Contents for 6500XD 2022

Reviews:

Related manuals for 6500XD 2022

Brands by name

Popular brands

Chevrolet 6500XD 2022, Owner'S Manual

Search results

Summary of Contents for 6500XD 2022

Reviews:

Related manuals for 6500XD 2022

Brands by name

Popular brands