Chevrolet 6500XD 2022 Owner'S Manual Download Page 105

Page: 105 / 312

Chevrolet Low Cab Forward 6.7L Diesel Engine 6500XD (GMNA-Localizing-

U.S.-15749874) - 2022 - CRC - 12/1/21

104

Climate Controls

Air Vents

1. Driver Side Outlets. Airflow direction is

adjustable.

2. Windshield Outlets. Air is delivered

towards the windshield.

3. Passenger Side Outlets. Airflow

direction is adjustable.

4. Door Windows Outlet. Air is delivered

towards the door windows

5. Foot Outlets. Air is delivered towards

the feet.

Air Flow Direction Control Lever

Use the tab to adjust the airflow direction
from the outlet. To close the outlet, move
the tab fully down.

Maintenance

Passenger Compartment Air Filter

Removing the Inside Air Filter

1. Open the front lid. See

Front Lid

194

Summary of Contents for 6500XD 2022

























































































































































































































































































































Search results

Summary of Contents for 6500XD 2022

Reviews:

Brands by name

Popular brands

Chevrolet 6500XD 2022, Owner'S Manual

Search results

Summary of Contents for 6500XD 2022

Reviews:

Brands by name

Popular brands