Chevrolet 2013 Malibu Owner'S Manual Download Page 298 | Manualshive

Page: 298 / 436

background image

Black plate (32,1)

Chevrolet Malibu Owner Manual - 2013 - CRC - 6/6/12

10-32

Vehicle Care

Passenger Side Shown, Driver
Side Similar

1. Turn Signal Lamp

2. DRL/Parking Lamp

3. Sidemarker Lamp

Front Turn Signal, Parking, and
Sidemarker Lamps

To replace one of these lamps on a
base, uplevel, or HID assembly:

1. For the driver side bulb, remove

the windshield washer bottle
filler neck by firmly pulling it
straight up and out of the bottle.

2. Remove the bulb socket from

the headlamp assembly by
turning it counterclockwise.

3. Remove the bulb from the

socket.

4. Replace the bulb in the bulb

socket.

5. Install the bulb socket in the

headlamp assembly by turning it
clockwise.

6. For the driver side, reinstall the

windshield washer bottle filler
neck by firmly pushing it straight
into the bottle. Ensure that the
filler neck clip engages into the
underhood electrical center
retainer.

Fog Lamps

To replace the front fog lamp bulb:

1. Remove the five access panel

fasteners under the front fascia.

2. Lower the panel far enough to

access the fog lamp bulb.

«
...
296
297
298
299
300
...
»

Summary of Contents for 2013 Malibu





















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2013 Malibu

Brand: Jeep Pages: 6

Brand: IAME Pages: 17

Brand: K&M Pages: 3

Brand: FORM FIT Pages: 2

Brand: Saab Pages: 3

Car Cup Holder Phone Mount

Brand: UGREEN Pages: 9

Code Alarm PROFESSIONAL SERIES CA 5550SST

Brand: Audiovox Pages: 14

Brand: Tachosys Pages: 28

Brand: Toyota Pages: 636

Brand: SAN HIMA Pages: 10

Security Cage Kit

Brand: Toro Pages: 8

Brand: Ranger design Pages: 22

Brand: Aries Pages: 3

Brand: Ranger design Pages: 22

Brand: Rugged Ridge Pages: 3

Brand: Nav TV Pages: 8

Brand: Haltech Pages: 13

V2 Two-Bike Carrier

Brand: LetsGoAero Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands