Chevrolet 2013 Malibu Owner'S Manual Download Page 259 | Manualshive

Page: 259 / 436

background image

Black plate (43,1)

Chevrolet Malibu Owner Manual - 2013 - CRC - 6/6/12

Driving and Operating

9-43

Lane Departure
Warning (LDW)

The vehicle may have an LDW
system. Read this entire section
before using the system.

{

WARNING

The LDW system is an aid to help
the vehicle stay in the driving
lane. It does not steer the vehicle.
The LDW system may not:

.

Provide enough time to avoid
a crash.

.

Detect lane markings under
bad weather conditions or if
the windshield is dirty.

.

Detect lane markings and will
not detect road edges.

.

Warn that the vehicle is
crossing a lane marking if the
system does not detect the
lane marking.

(Continued)

WARNING (CONTINUED)

If LDW only detects lane
markings on one side of the road,
it will only warn you when
departing the lane on the side
where it has detected a lane
marker. Even with LDW, always
keep your attention on the road
and maintain proper vehicle
position within the lane, or vehicle
damage, injury, or death could
occur. Always keep the
windshield clean and do not use
LDW in bad weather conditions.

When the vehicle crosses a
detected lane marking, the LDW
indicator will flash and three beeps
will sound. LDW will not warn if the
turn signal is on or if a sharp
maneuver is made.

How the System Works

The LDW camera sensor is on the
windshield ahead of the rearview
mirror.

To turn LDW on and off, press

@

on

the center stack, forward of the shift
lever. The control indicator will light
when LDW is on.

When the vehicle is started, the
LDW indicator will come on briefly.

LDW operates at speeds of 56 km
(35 mph) or greater. If LDW is on,
the LDW indicator will appear green
if the system detects a left or right
lane marking. This indicator will
change to amber, flash, and sound
three beeps if the vehicle crosses a
detected lane marking without using
the turn signal.

«
...
257
258
259
260
261
...
»

Summary of Contents for 2013 Malibu





















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2013 Malibu

Brand: Daihatsu Pages: 340

Brand: Fabbri Pages: 4

Brand: Alpine Pages: 8

Brand: Code 3 Pages: 8

Brand: Axxess Pages: 8

Brand: Yakima Pages: 13

Brand: Menabo Pages: 11

STEALTH POWER RBP-216-SP

Brand: RBP Pages: 16

STREET SUPER SHIFTER

Brand: HURST Pages: 2

Brand: Great Wall Pages: 18

Brand: WIX Pages: 2

Brand: Brodit Pages: 2

Park Vision VAL632210

Brand: Valeo Pages: 25

Brand: Paser Pages: 2

Brand: Xblitz Pages: 56

Brand: r.LiNK Pages: 21

Brand: Porsche Pages: 146

Brand: Honda Pages: 279

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands