Chevrolet 2013 Malibu Owner'S Manual Download Page 131

Page: 131 / 436

Black plate (23,1)

Chevrolet Malibu Owner Manual - 2013 - CRC - 6/6/12

Instruments and Controls

5-23

If the light stays on and the engine
does not start, there could be a
problem with the theft-deterrent
system. See

Immobilizer Operation

(Key Access) on page 2

‑

Immobilizer Operation (Keyless
Access) on page 2

‑

For vehicles with an uplevel or
eAssist cluster, this light displays in
the Driver Information Center (DIC)
screen.

High-Beam On Light

This light comes on when the
high-beam headlamps are in use.

See

Headlamp High/Low-Beam

Changer on page 6

‑

Front Fog Lamp Light

The fog lamp light comes on when
the fog lamps are in use.

The light goes out when the fog
lamps are turned off. See

Fog

Lamps on page 6

‑

Lamps On Reminder

The lamps on reminder light comes
on when the exterior lamps are in
use. See

Exterior Lamp Controls on

page 6

‑

Cruise Control Light

This light is white whenever the
cruise control is set and turns green
when the cruise control is active.

The light goes out when the cruise
control is turned off. See

Cruise

Control on page 9

‑

For vehicles with the uplevel or
eAssist cluster, this telltale will be
shown in the Driver Information
Center (DIC) screen.

Summary of Contents for 2013 Malibu





















































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Malibu

Reviews:

Related manuals for 2013 Malibu

Brands by name

Popular brands

Chevrolet 2013 Malibu, Owner'S Manual

Search results

Summary of Contents for 2013 Malibu

Reviews:

Related manuals for 2013 Malibu

Brands by name

Popular brands