Chevrolet 2009 Uplander Owner'S Manual Download Page 175

Page: 175 / 464

To idle the vehicle with the DRL and automatic
headlamps off, toggle the exterior lamp control
to off after starting the vehicle.

The regular headlamp system should be turned on
when needed.

Instrument Panel Brightness

The instrument panel brightness knob is located in the
center of the interior lamp controls.

Turn the knob clockwise or counterclockwise to brighten
or dim the lights.

Interior Lamps Control

The interior lamp control is located on the instrument
panel to the left of the steering column.

Turn the outer knob to control the interior lamps.

(Interior Lamp Override): The interior lamps

remain off while any door is open.

(Door): Turns the interior lamps on while any door

is open and when the ignition key is removed from
the ignition.

(Interior Lamps): Turns the interior lamps on.

The inner knob adjusts the instrument panel brightness,
described earlier in this section.

3-15

Summary of Contents for 2009 Uplander

















































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 Uplander

Reviews:

Brands by name

Popular brands

Chevrolet 2009 Uplander, Owner'S Manual

Search results

Summary of Contents for 2009 Uplander

Reviews:

Brands by name

Popular brands