Home
/
Chevrolet
/
2009 Uplander
/
Owner'S Manual

Chevrolet 2009 Uplander, Owner'S Manual

Share

Page: 130 / 464

Chevrolet 2009 Uplander Owner'S Manual Download Page 130

B (ACC/ACCESSORY): This is the position in which
you can operate the electrical accessories, such as
the radio.

C (ON/RUN): This is the position to which the switch
returns after the engine is started and the ignition key is
released. This is the position for driving. Even while
the engine is not running, ON/RUN can be used
to operate your electrical accessories and to display
some instrument panel warning lights.

The battery could be drained if you leave the key in the
ACC/ACCESSORY or ON/RUN position with the
engine off. You may not be able to start your vehicle if
the battery is allowed to drain for an extended period
of time.

D (START): This position starts the engine. When the
engine starts, release the ignition key. The switch
will return to ON/RUN for driving.

Key In the Ignition

Never leave your vehicle with the keys inside, as it is an
easy target for joy riders or thieves. If you leave the
key in the ignition and park your vehicle, a chime
will sound, when you open the driver’s door. Always
remember to remove your key from the ignition and take
it with you. This will lock your ignition and transmission.
Also, always remember to lock the doors.

The battery could be drained if you leave the key in the
ignition while your vehicle is parked. You may not be
able to start your vehicle after it has been parked for an
extended period of time.

Retained Accessory Power (RAP)

These vehicle accessories can be used for up to
10 minutes after the engine is turned off:

•

Audio System

•

Power Windows

These features continue to work up to 10 minutes after
the engine is turned off or until either door is opened.
If a door is opened, the power windows and audio
system will shut off.

Starting the Engine

Move the shift lever to P (Park) or N (Neutral). The
engine will not start in any other position. To restart the
engine when the vehicle is already moving, use
N (Neutral) only.

Notice: Do not try to shift to P (Park) if the vehicle
is moving. If you do, you could damage the
transmission. Shift to P (Park) only when the vehicle
is stopped.

2-32

«
...
128
129
130
131
132
...
»

Summary of Contents for 2009 Uplander

















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands