Setting the Clock
Your radio has buttons for setting the time. To set the
time, follow these instructions:
1. Press the HOUR button along with the CLOCK
button to increase the hour.
2. Press the MIN (minute) button along with the
CLOCK button to increase the minutes.
RESET: Press this button during the clock setting mode
to reset the time to the nearest whole hour. More than
30 minutes will increase the hour display to the next
hour. Less than 30 minutes will decrease the hour
display. Resetting the clock display to the nearest hour,
if needed, allows for a quicker and more accurate
way of setting the time.
CLOCK: Press this button to enter the clock
setting mode.
Press and release this button to toggle between the
clock and the function mode.
•
While the clock is displayed, the radio and CD
player can be used. If a change is made to the
radio or CD player settings, the display shows the
change for 10 seconds before returning to the
clock display.
•
When the function mode is displayed, the radio
and CD player can be used. Current radio and
CD player function information is displayed on
the screen.
The alarm time setting works even when a key is in the
ACC or OFF position, but no beep will sound. See
“Using the Alarm” under Radio(s) on page 3-40.
3-39
Summary of Contents for 2008 T Series
