Chevrolet 2008 Avalanche Owner'S Manual Download

Page: 441 / 528

Removing the Spare Tire and Tools

The jack and the wheel blocks are located under a
cover near the passenger side rear seat.

1. Remove the jack cover by turning the two wing nuts

one-quarter turn counterclockwise and pulling the
jack cover off.

A. Wheel Blocks
B. Knob
C. Wing Nut
D. Retaining Hook

E. Jack
F. Jack Head
G. Mounting Bracket

2. Release the jack (E) from the mounting bracket (G)

by turning the knob (B) on the jack counterclockwise
to lower the jack head (F) from the mounting bracket.

Rear Seat (Passenger Side) Jack Cover

5-81

Summary of Contents for 2008 Avalanche

















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Avalanche

Reviews:

Related manuals for 2008 Avalanche

Brands by name

Popular brands

Chevrolet 2008 Avalanche, Owner'S Manual

Search results

Summary of Contents for 2008 Avalanche

Reviews:

Related manuals for 2008 Avalanche

Brands by name

Popular brands