Chevrolet 2008 Avalanche Owner'S Manual Download | Manualshive

Page: 211 / 528

background image

Rear Window Defogger

The rear window defogger uses a warming grid to
remove fog from the rear window.

<

(Rear Window Defogger):

Press this button to

turn on the rear window defogger. It will automatically
turn off several minutes after it has been activated.
The defogger can also be turned off by pressing
the button again or by turning off the engine. Do not
drive the vehicle until all the windows are clear.

If your vehicle has heated outside rearview mirrors,
the mirrors will heat to help clear fog or frost from the
surface of the mirror when the rear window defog button
is pressed.

Notice:

Do not use a razor blade or sharp object

to clear the inside rear window. Do not adhere
anything to the defogger grid lines in the rear glass.
These actions may damage the rear defogger.
Repairs would not be covered by your warranty.

Outlet Adjustment

Your vehicle has air outlets located in the center and on
the side of your instrument panel that allow you to adjust
the direction and amount of airflow inside the vehicle.
Move the louvers up or down. Use the thumbwheel next
to or underneath the outlet to close the louvers. For the
most efficient airflow and temperature control, keep the
outlet in the fully opened position.

Operation Tips

•

Keep the hood and front air inlets free of ice, snow,
or any other obstruction, such as leaves. The
heater and defroster will work far better, reducing
the chance of fogging the inside of your windows.

•

Keep the air path under the front seats clear
of objects. This helps air to circulate throughout
your vehicle.

•

Adding outside equipment to the front of your
vehicle, such as hood-air deflectors, etc., may affect
the performance of the heating and air conditioning
system. Check with your dealer before adding
equipment to the outside of your vehicle.

3-31

«
...
209
210
211
212
213
...
»

Summary of Contents for 2008 Avalanche

















































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 Avalanche

Brand: Yakima Pages: 12

Brand: JEHNERT SOUND DESIGN Pages: 8

Experience Series

Brand: Rainbow Pages: 19

Brand: Yakima Pages: 12

Brand: 3SIXT Pages: 12

Brand: Prorack Pages: 14

Brand: FORM FIT Pages: 2

Edge Flush Rail

Brand: Thule Pages: 12

Brand: Saab Pages: 445

Brand: Prorack Pages: 20

Brand: Sanitas Pages: 36

Brand: v.LOGiC Pages: 22

Brand: Car-Interface Pages: 23

Brand: Volvo Pages: 18

Brand: ECS Electronics Pages: 42

Brand: Flash Cover Pages: 2

Brand: Volvo Pages: 286

PLATINUM HT051202

Brand: Haltech Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands