manualshive.com logo in svg

Chevrolet 2008 Avalanche, Owner'S Manual

The Chevrolet 2008 Avalanche is a versatile and rugged truck that combines the best features of an SUV with a pickup truck. Explore its impressive Specifications and discover its full potential by downloading the user manual for free from our website.

Share
Download
background image

Luggage Carrier

The vehicle may have a luggage carrier that can be
used to load things on top of the vehicle.

The luggage carrier has siderails attached to the roof.
It may also have crossrails which can be moved
back and forth to help secure cargo. Tie the load
to the siderails or siderail supports.

Notice:

Loading cargo on the luggage carrier that

weighs more than 200 lbs (91 kg) or hangs over
the rear or sides of the vehicle may damage your
vehicle. Load cargo so that it rests on the slats
as far forward as possible and against the side rails,
making sure to fasten it securely.

Do not exceed the maximum vehicle capacity when
loading your vehicle. For more information on vehicle
capacity and loading, see

Loading Your Vehicle on

page 4-36

.

To prevent damage or loss of cargo while you are
driving, check to make sure the luggage and cargo are
still securely fastened.

Be sure the cargo is properly loaded.

•

If small heavy objects are placed on the roof, cut a
piece of 3/8 inch plywood to fit inside the crossrails
and siderails to spread the load. Tie the plywood
to the siderail supports.

•

Tie the load to the crossrails or the siderail
supports. Use the crossrails only to keep the load
from sliding. To move a crossrail, lift the release
lever, on both sides of the rail, up to loosen it. Slide
the crossrail to the desired position balancing the
force side to side. Press the release lever on both
sides of the rail, down to tighten it. Try to slide the
crossrail back and forth slightly to be sure it is tight.

•

If you need to carry long items, move the crossrails
as far apart as they will go. Tie the load to the
crossrails and the siderails or siderail supports. Also
tie the load to the bumpers. Do not tie the load so
tightly that the crossrails or siderails are damaged.

•

After moving a crossrail, be sure it is securely locked
into the siderail.

Your vehicle has a Center High-Mounted Stoplamp
(CHMSL) located above the rear glass.

If items are loaded on the roof of the vehicle, care
should be taken not to block or damage the CHMSL unit.

2-72

Summary of Contents for 2008 Avalanche

















































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 Avalanche

Kolpin 25-9250 Owner'S And Operator'S Manual preview
25-9250
Brand: Kolpin Pages: 25
DEFA WarmUp 411702 Fitting Instructions Manual preview
WarmUp 411702
Brand: DEFA Pages: 9
rough country Slim Line LED Light Grille Kit Manual preview
Slim Line LED Light Grille Kit
Brand: rough country Pages: 8
U & Me Brothers LK-168A Manual preview
LK-168A
Brand: U & Me Brothers Pages: 6
Honda Pilot 2019 Owner'S Manual preview
Pilot 2019
Brand: Honda Pages: 85
STARLANE POLE STAR PRO Installation And Instruction Manual preview
POLE STAR PRO
Brand: STARLANE Pages: 24
SAN HIMA SGBR015 Installation Instructions Manual preview
SGBR015
Brand: SAN HIMA Pages: 10
Yakima Prorack K436 Fitting Instructions Manual preview
Prorack K436
Brand: Yakima Pages: 13
Veldo Teknoloji DUCATO Manual preview
DUCATO
Brand: Veldo Teknoloji Pages: 32
Saturn 2007 Ion Owner'S Manual preview
2007 Ion
Brand: Saturn Pages: 440
GReddy 12519101 Instruction Manual preview
12519101
Brand: GReddy Pages: 12
BMW FXX ATM Emulator User And Installation Manual preview
FXX ATM Emulator
Brand: BMW Pages: 5
Whispbar WB201 Manual preview
WB201
Brand: Whispbar Pages: 14
Porsche BOXTER - Technical Manual preview
BOXTER -
Brand: Porsche Pages: 146
Ford TRANSIT 2015 Quick Reference Manual preview
TRANSIT 2015
Brand: Ford Pages: 8
Rugged Ridge 13551.33 Manual preview
13551.33
Brand: Rugged Ridge Pages: 3
Vauxhall 2013 Zafira Tourer Owner'S Manual preview
2013 Zafira Tourer
Brand: Vauxhall Pages: 289
Mazda 2014 CX-9 User Manual preview
2014 CX-9
Brand: Mazda Pages: 604

Brands by name

Popular brands

Load more brands