Chevrolet 2006 Epica Owner'S Manual Download Page 265

Page: 265 / 368

Front Turn Signal Lamps

To replace a front turn signal lamp (A) bulb, do the
following:

1. Open the hood. See

Hood Release on page 5-11

for more information.

2. Reach behind the headlamp assembly to locate the

front turn signal bulb socket.

3. Disconnect the wiring harness connector from the

bulb socket.

4. Turn the front turn signal bulb socket

counterclockwise and pull it out of the lamp housing.

5. Press the bulb inward and turn it counterclockwise

to remove it from the bulb socket.

6. Install the new bulb into the socket by pressing it in

and turning it clockwise.

7. Reverse Steps 1 through 4 to reinstall.

5-41

Summary of Contents for 2006 Epica

















































































































































































































































































































































































Search results

Summary of Contents for 2006 Epica

Reviews:

Related manuals for 2006 Epica

Brands by name

Popular brands

Chevrolet 2006 Epica, Owner'S Manual

Search results

Summary of Contents for 2006 Epica

Reviews:

Related manuals for 2006 Epica

Brands by name

Popular brands