Chevrolet 2006 Avalanche Owner'S Manual Download

Page: 423 / 532

3. Pull the old bulb from the bulb socket, keeping the

bulb straight as you pull it out.

4. Install the new bulb.

5. Reverse steps 1–3 to reinstall the license

plate lamp.

Replacement Bulbs

Exterior Lamp

Bulb Number

Back-up Lamp

3157

Daytime Running Lamps (DRL)

4114K

Front Parking and Turn
Signal Lamp

3157A or 3457NA

Headlamps

High-Beam

*9011 or 9005

Low-Beam

9006

Stoplamp, Taillamp and Turn
Signal Lamp

3157

Sidemarker Lamp

194

*Vehicles with Body-Side Cladding

For replacement bulbs not listed here, contact
your dealer.

Windshield Wiper Blade
Replacement

Windshield wiper blades should be inspected for wear
and cracking. See

Scheduled Maintenance on page 6-4

for more information.

Replacement blades come in different types and are
removed in different ways. For proper type and length, see

Normal Maintenance Replacement Parts on page 6-14

To replace the windshield wiper blade assembly do the
following:

1. Lift the wiper arm away from the windshield.

5-63

Summary of Contents for 2006 Avalanche





















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 Avalanche

Reviews:

Related manuals for 2006 Avalanche

Brands by name

Popular brands

Chevrolet 2006 Avalanche, Owner'S Manual

Search results

Summary of Contents for 2006 Avalanche

Reviews:

Related manuals for 2006 Avalanche

Brands by name

Popular brands