Chery J11, User Manual, Page: 44 / 152

The controls for each seat heater are
located near the bottom center of the
instrument panel. After turning the ig-
nition ON, you can choose from High
or Low heat settings. When the switch
is in the middle position, the seat
heater is Off. Each switch is equipped
with LED lights to indicate the level of
heat that each seat is set at. Lights
Headlights, Parking Lights (Front
Position Lights, Instrument Panel
Lights and License Light)
Turn the end of the multifunction
switch lever to the first setting for
parking lights (front position lights, in-
strument panel lights and license
light). Turn the end of the lever to the
second setting for headlight opera-
tion.
NOTE: The headlights only work when
the ignition switch is ON. The headlights
will turn off automatically when the en-
gine is starting or when the engine is
stopped.
High Beam/Low Beam Select
Switch
When the multifunction lever is in the
headlight position, push the multi-
function lever away from you to switch
the headlights to the HIGH beam po-
sition. When the high beam position is
selected, the high beam indicator on
the instrument cluster will illuminate
immediately. Pull the lever toward you
to switch the headlights back to LOW
beam.
Heated Seat Switches
Headlight Control
High Beam Control
FEATURES OF YOUR VEHICLE – 43
Chery Automobile Co., Ltd.