After having memorized the limit switches, drive the rolling shutter to the opening
position and then perform the following command sequence:
At the end of the sequence, wait until the rolling shutter is completely lowered. From this
moment onwards the motor moves in “Dead Man” mode.
Carry out the following operations:
• Lower the rolling shutter until the adjustable slats are completely opened:
• If you wish, raise the rolling shutter until it reaches an intermediate opening of the slats
(preferred opening position);
• Perform the following confirmation sequence:
The rolling shutter will move in sequence to the
memorised positions.
SLAT TILTING MECHANISM SETTING
MODE 5
:
Orientable roller shutter without coupling point with tilting
function adjustable below the lower limit.
Specific for roller shutter type Rolltek and suitable aswell for roller shutter Orienta /
Rollflap / Biroll / Gelosia / Girasole / Easyroll / Inklina / Alika / Luxor Noon, if the customer
wants to set the number of opening slats. Suitable for centralised control units.
78
Functions of the button panel*
Type of Command
Outside of tilting area
In tilting area
UP short (< 1 sec)
Short movement upward
Less light
DOWN short (< 1 sec)
Short movement downward
More light
UP long (between 1 and 2 s)
Completely raised
DOWN long (between 1 and 2 s)
Completely lowered
UP very long (> 2 sec)
Middle position (if previously set)
DOWN very long (> 2 sec)
Entry in tilting area
sequence UP/DOWN or
DOWN/UP fast (0.5 sec)
Middle position (if previously set) or
tilting function activation
-
DOWN short
from lower limit
More light and activation of the
tilting function
-
* see key to symbols and operational notes
PROGR.
FROM THE WHITE WIRE
E N G L I S H