71
SETTING/DELETING A MIDDLE POSITION
From the OPENING position
From the CLOSING position
From the OPENING position
From the CLOSING position
After the sequence the motor will go into “Dead Man” mode so as to enable the exact
adjustment of the middle position desired. To memorise the position chosen, confirm
with this sequence:
DELETING THE MIDDLE POSITION
Use one of the sequences shown here. The motor will confirm with 3 final movements that
the middle position has been cancelled.
To bring the shutter to the middle
position, exit the slat tilt mode
and do the following:
or
MOVEMENT TO MIDDLE POSITION
MOVEMENT TO MIDDLE POSITION
E N G L I S H
PROGR.
FROM THE WHITE WIRE