69
EXAMPLE N.2
Setting first the closing position
SETTING THE CLOSING POSITION
SETTING THE OPENING POSITION
If the rolling shutter is completely closed, you have first to drive it up by around
20 cm.
Bring the rolling shutter to the closing position using the UP or DOWN button. (Closed
position)
With lockdown hangers:
press UP or DOWN button until the motor stops automatically.
Without lockdown hangers:
use the UP or DOWN button to drive the rolling shutter to
the necessary closing position.
Follow the command sequence given in order to save the closing position. At the end
of the sequence, the motor carries out a short “up” movement which confirms that the
settings have been saved.
Pressing now the UP button, drive completely up the rolling shutter to the open position.
With physical stops:
press the UP button until the motor stops automatically.
Without physical stops:
use UP or DOWN button to drive the rolling shutter to the
necessary opening position.
Follow the command sequence given in order to save the opening position. At the end of
the sequence, the motor carries out a short “down” movement which confirms that the
settings have been saved.
DOWN
DOWN
DOWN
confirm
confirm
UP
UP
UP
E N G L I S H
PROGR.
FROM THE WHITE WIRE