68
EXAMPLE N.1
Setting first the opening position
SETTING THE OPENING POSITION
SETTING THE CLOSING POSITION
If the rolling shutter is completely open, you have first to drive it down by
around 20 cm.
Bring the rolling shutter to the opening position using the UP or DOWN button. (Open
position)
With physical stops:
press UP or DOWN button until the motor stops automatically.
Without physical stops:
use the UP or DOWN button to drive the rolling shutter to the
necessary opening position.
Follow the command sequence given in order to save the opening position. At the end of
the sequence, the motor carries out a short “down” movement which confirms that the
settings have been saved.
Pressing now the DOWN button, drive completely down the rolling shutter to the closing
position.
With lockdown hangers:
press the DOWN button until the motor stops automatically.
Without lockdown hangers:
use UP or DOWN button to drive the rolling shutter to the
necessary closing position.
Follow the command sequence given in order to save the closing position. At the end
of the sequence, the motor carries out a short “up” movement which confirms that the
settings have been saved.
UP
UP
UP
confirm
confirm
DOWN
DOWN
DOWN
PROGR.
FROM THE WHITE WIRE
E N G L I S H