64
REMO
TE CONTROL PROGR.
E N G L I S H
DELETING THE TILTING FUNCTIONS
To deactivate the tilting functions, perform the command sequence:
2 sec
A
+
B
C
+
B
C
SLAT TILTING ADJUSTMENT IMPULSE
Use the following sequence to enable the slat tilting adjustment impulse with a double
duration (long) compared to what it’s normally set in the factory (short):
2 sec
+
B
C
2 sec
+
A
B
+
A
B
+
A
B
C
C
in this way fewer impulses will be needed to adjust the opening of the slats from their
minimum to their maximum.
Use the following sequence to reset the duration of the slat tilting adjustment impulse set
in the factory (short):
The total deletion of the limit switches automatically resets the short slat tilting adjustment
impulse.