RM245 Series
System Components Removal and Installation
│
21
Figure 18
3.5” HDD installation (tool-less type)
1. Slide in the HDD until it aligns the anchor point of the HDD tray.
2. Push down the HDD when it is locked into place.
Figure 19 3.5” HDD removal (tool-less type)
1. Bottom up the HDD assembly, and loosen the screw as shown.
2. Press out the HDD by your two thumbs.
NOTE:
Please operate this on a stable surface in case the HDD dropping unexpectedly.
3. Lift the other side with your other fingers and release the HDD.
