manualshive.com logo in svg

Chelsio Communications Chelsio T4, Installation And User Manual

Share
Download
Chelsio Communications Chelsio T4 Installation And User Manual Download Page 265

XX. Unified Wire Manager (UM) 

Chelsio T5/T4 Unified Wire for Linux

 

Page 265

 

2.2. 

Platform/Component Matrix 

The table below lists the Linux distributions and the supported UM components. 

Distribution 

Supported UM Components 

RHEL 6.6, 2.6.32-504.el6 

Management Agent, Management Client, Web 

Management Interface 

SLES 11 SP3, 3.0.76-0.11-default  

Management Agent, Management Client, Web 

Management Interface

 

 

 

2.3. 

Platform/Driver Matrix 

The table below lists the Chelsio drivers and their supported versions: 

Chelsio driver 

Version 

NIC 

T3: 2.0.0.1(RHEL 5.8,6.3; inbox driver for SLES11SP3) 
T4,T5:

 

2.12.0.2 

TOE 

T3 : 2.0.0.1 (RHEL 5.8,6.3) 
T4,T5:  2.12.0.2

 

Bypass 

T4: 2.12.0.2 

Bonding 

T3 : 2.0.0.1 
T4:  3.7.1

 

iSCSI Target 

T3:

 

5.2.0-0560 

T4,T5: 2.12.0.2-1180

 

Open iSCSI Initiator 

T3,T4,T5: 2.0-873 

iWARP 

T3,T4,T5: 2.12.0.2

 

 

FCoE Initiator 

T4: 2.12.0.2 

 

 

Summary of Contents for Chelsio T4
































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands