CHEETAH Hardware User’s Manual
Imperx, Inc.
Rev. 1.6
6421 Congress Ave.
8/26/2016
Boca Raton, FL 33487
+1 (561) 989-0006
73 of 121
Strobe 2 Reference Select
This register sets the reference for the strobe 2 start.
Address
:
0x0644
Data (0)
:
0 – Exposure Start
1 – Readout Start
Data (31:1)
:
N/A
Strobe 2 Delay
This register sets the strobe 2 delay from the selected Reference
Address
:
0x0648
Data (19:0)
:
<value> – delay in micro sec., 1 sec max.
Data (31:20)
:
N/A
Strobe 2 Width
This register sets the strobe 2 pulse duration.
Address
:
0x064C
Data (19:0)
:
<value> – width in micro sec., 1 sec max.
Data (31:20)
:
N/A
3.3.16 Pulse Generator Registers
Pulse Generator Timing Granularity
This register sets the pulse generator main timing resolution. The main
resolution is in microseconds, and 4 granularity steps are possible – x1, x10,
x100, x1000 (x1000 is equal to 1ms timing resolution).
Address
:
0x0690
Data (1:0)
:
00 – x1
01 – x10
10 – x100
11 – x1000
Data (31:2)
:
N/A
Pulse Generator Pulse Width
This register sets the value of the pulse width in microseconds.
Address
:
0x0694
Data (18:0)
:
<value> – pulse width in microseconds
Data (31:19)
:
N/A
