Check Point Smart-1 225, Installing

Page: 1 / 9

Classification [Protected] P/N:705871 | 1
© 2014 Check Point Software Technologies Ltd. All rights reserved.
For a list of our trademarks, please refer to: http://www.checkpoint.com/copyright.html .
For a list of our Third Party Copyright notices, please refer to: http://www.checkpoint.com/3rd_party_copyright.html
Installing a Smart-1 LOM Card
705871
Prot ect ed
2014
This document is for Smart-1 225, Smart-1 3050, and Smart-1 3150 models.
Important

Read the Health and Safety Information in the Getting Started Guide
( http://supportcontent.checkpoint.com/documentation_download?ID=32309 ).

To protect the appliance and LOM card from electrostatic discharge, make sure that
you are grounded.

We recommend that you use an ESD grounding wrist strap. Connect the grounding
plug on the wrist strap to the chassis grounding point.
Preparing the Appliance
Before you start to install or remove the LOM card, make sure that:

The appliance is in a clean environment and on a level surface.

You can physically access and open the cover of the appliance.

You can connect to the WebUI or CLI.

You have the Check Point LOM card RMA kit.
RMA Kit Contents

FRU Installation Guide

LOM card

Screwdriver

RMA kit sticker

ESD grounding strap (anti-static)