TE250XN
Rack Mounting for Check Point Appliances | 22
Installing the Appliance in the Rack
Important - To prevent injury or damage, at least two people are required to install the
appliance in a rack.
Important - Do not attempt to lift, drag, or otherwise move the appliance using the
handles on the power supply units.
To install the appliance in the rack:
1. Align the inner rack rails to be level with the rack rails.
2. Move the appliance into the rack as far as it can go.
3. On the appliance rails:
a. Press and pull gently on the blue release strips on both sides of the appliance.
b. While continuously holding the blue release strips, push the appliance into the rack.
4. Tighten all of the rail mounting screws.
5. For each ear mount, use a rack mount screw to secure it to the rack and make sure that the appliance
cannot move. This disables the telescopic rails.
Use the rack post mounting hole that is between the rack rail screws (see item 2 in the figure).
