TE250XN
Rack Mounting for Check Point Appliances | 20
To attach the ear mount brackets to the appliance:
1. Place the ear mount bracket on the side of the appliance near the front panel.
2. Attach the ear mount bracket to the appliance using the six ear mount bracket screws.
3. Do steps 1 - 2 again for the other side of the appliance.
Preparing Round-Hole Rack Rails
If you use round-hole racks, you must replace the eight square-hole rack screws that come attached to the
outer rack rails with the eight supplied round-hole rack screws.
Do this procedure before you attach the outer rack rails to the rack.
To attach the round-hole rack screws:
1. Use a screwdriver to remove the square-hole rack screws from the front and back of the outer rack
rail.
2. Replace with four of the supplied round-hole rack screws.
3. Do steps 1 - 2 again for the other outer rack rail.
Attaching the Outer Rack Rails
Attach the outer rack rails to the rack. Make sure that you have the two rack rails ready.
