Appliance Configuration
Check Point 1400 Appliances Centrally Managed Administration Guide R77.20.85 | 72
WINS
Select one of these options:
•
Use the WINS servers configured for the internet connection
•
Use the following WINS servers -
Enter the IP addresses of the
First
and
Second
WINS
servers.
Lease section
•
Lease time
- Configure the timeout in hours for a single device to retain a dynamically
acquired IP address.
Other Settings
You can optionally configure these additional parameters so they will be distributed to DHCP
clients:
•
Time servers
•
Call manager
•
TFTP server
•
TFTP boot file
•
X-Windows display manager
•
Avaya IP phone
•
Nortel IP phone
•
Thomson IP phone
Custom Options
Lets you add custom options that are not listed above. For each custom option, you must configure
the name, tag, type, and data fields.
Configuring a Hotspot
In the
Device
>
Hotspot
page, if a network interface was defined for hotspot, you can configure:
•
Guest access - A session is created for an IP address when a user accepts terms or
authenticates in the Hotspot portal. The session expires after the configured timeout (240
minutes by default).
•
Hotspot portal - Customize the portal's appearance.
•
Hotspot exceptions - Define specified IP addresses, IP ranges or networks to exclude from the
Hotspot.
If no network interface was defined for the Hotspot, click
Configure in Local Network
.
In the Access section of the page, you can configure if authentication is required and allow access
to all users or to a specified user group (Active Directory, RADIUS or local).
Hotspot is automatically activated in the system.
Summary of Contents for L-71
Page 122: ......
