Appliance Configuration
Check Point 1400 Appliances Centrally Managed Administration Guide R77.20.85 | 56
ends. Make sure you return to the packet capture page, stop and download the capture result
before you end the WebUI session.
Note
- The capture utility uses tcpdump. "fw monitor" is available through the command line
interface.
When the mini-USB is used as a console connector in 1400 appliances, Windows does not
automatically detect and download the driver needed for serial communication. You must
manually install the driver. For more information, see sk111713
https://supportcontent.checkpoint.com/solutions?id=sk111713
To download the Windows driver for Mini-USB console socket:
Click the
Download
link.
Note
- This page is available from the
Home
,
Device
, and
Logs & Monitoring
tabs.
Managing the Device
This section describes how to set up and manage your Check Point Appliance.
Configuring Internet Connectivity
The
Device
>
Internet
page shows how the Check Point Appliance connects to the Internet. You
can configure a single Internet connection or multiple connections in High Availability or Load
Balancing configurations. When multiple Internet connections are defined, the page shows them
in a table. You can add a new connection and edit, delete, or disable existing connections. When
there are multiple Internet connections, you can select which mode to use -
High Availability
or
Load Balancing
.
We recommend you contact your local Internet Service Provider (ISP) to understand how to
configure your specific Internet connection.
Note
- ADSL/VDSL settings are relevant only for devices that have a DSL port.
To configure Internet connectivity:
1.
Click
Configure Internet
(if not configured at all),
Add
(for another Internet connection), or
Edit
.
The New or Edit Internet Connection window opens.
2.
Configure the fields in the tabs:
Configuration tab
Note
- When you change the connection type, the appliance may disconnect from the Internet.
•
Connection name
- Enter a name for the connection or leave the default "InternetN" label
(where N indicates an incrementing number).
•
Interface name
-
•
WAN
or
DMZ
is
for most types of Internet connections.
•
LAN
. You can also use unassigned LAN ports with no VLANs for Internet connections. When
you delete the internet connection, the port revers to an unassigned LAN.
Summary of Contents for L-71
Page 122: ......
